Specifications
Drivetrain
| Chain | SRAM X01 Eagle, silver, 12-speed w/PowerLink |
|---|---|
| Crank | Custom SRAM X01 Eagle, alloy, 24mm spindle, 52mm chainline |
| Derailleurs | Rear: SRAM X01 Eagle, 12-speed |
| Shifters | SRAM X01 Eagle, 12-speed, trigger |
| Cassette | SRAM XG-1295, 12-speed, 10-50t |
Frameset
| Fork | RockShox Lyrik RC 27.5, Solo Air, compression and rebound adjust, tapered steerer, 15x110mm Maxle Stealth thru-axle, 46mm offset, 170mm travel |
|---|---|
| Frame | FACT 11m, X-Wing layout, full carbon chassis and rear end, All-Mountain Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, ManFu link, oversized pivot bearings, 12x148mm dropouts, replaceable derailleur hanger, 170mm of travel |
| Shoc | Rear: Custom Öhlins STX, Single Tube design, Rx All-Mountain Tune, 3rd Chamber air spring technology, AUTOSAG, adjustable compression & rebound damping, 216x57mm |
| Specialized Trail, 3D forged alloy, 4-bolt, 6-degree rise |
Wheels
| Hub | Front: Roval Traverse, sealed cartridge bearings, 15mm thru-axle, 110mm spacing, 24h - Rear: Roval Traverse, DT Swiss internals, sealed cartridge bearings, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h |
|---|---|
| Rims | Roval Traverse 650, hookless alloy, 29mm inner width, 24/28h, tubeless ready |
| Spokes | DT Swiss Revolution |
| Tyres | Front: Butcher, GRID casing, 650x2.3", 60TPI, Aramid folding bead, 2Bliss Ready - Rear: Slaughter, GRID casing, 650x2.3", 60TPI, Aramid folding bead, 2Bliss Ready |
Brakes
| Brakes | Front: SRAM Guide RS, hydraulic disc, organic pads, Guide S4 4-piston caliper, 200mm rotor - Rear: SRAM Guide RS, hydraulic disc, organic pads, Guide S4 4-piston caliper, 180mm rotor |
|---|
Components
| Handlebar | Specialized DH, 7050 alloy, 8-degree backsweep, 6-degree upsweep, 27mm rise, 780mm, 31.8mm |
|---|---|
| Grips | Specialized Sip Grip, half-waffle, S/M: regular thickness, L/XL: XL thickness |
| Saddle | Body Geometry Henge Expert, hollow titanium rails, 143mm |
| Seatpost | Command Post IRcc, 12 position micro-height adjustable, alien head design, bottom mount cable routing, remote adjust SRL lever, 30.9mm, S: 100mm, M/L/XL: 125mm travel |
| Stem | Specialized Trail, 3D forged alloy, 4-bolt, 6-degree rise |
| Pedals | Resin Test Ride w/toe clips |
geometry
| Stack | 613mm |
|---|---|
| Reach | 470mm |
| Head-Tube Length | 125mm |
| Head-Tube Angle | 65.5° |
| B-B Height (650x2.3) | 345mm |
| B-B Height (650x2.6) | 350mm |
| B-B Drop | 10.5mm |
| Trail | 106mm |
| Fork Length (full) | 559mm |
| Fork Rake/Offset | 51mm |
| Front-Center | 801mm |
| Chain-Stay Length | 425mm |
| Wheelbase | 1225mm |
| Top-Tube Length (horizontal) | 632mm |
| Bike Stand-Over Height | 796mm |
| Seat-Tube Length | 521mm |
| Seat-Tube Angle | 75° |
Other models in the Enduro (2017) serie
ENDURO COMP 650B
RRP £ 2600
S-WORKS ENDURO 29 - LIMITED EDITION FRAME
RRP £ 2800
S-WORKS ENDURO 650B FRAME
RRP £ 2800
S-WORKS ENDURO 29/6FATTIE FRAME
RRP £ 2800
S-WORKS ENDURO 650B - LIMITED EDITION FRAME
RRP £ 2800
Enduro Comp 29/6Fattie
RRP £ 2600
S-WORKS ENDURO 29/6FATTIE
RRP £ 6600
Enduro Elite Carbon 29/6Fattie
RRP £ 3700
S-WORKS ENDURO 650B
RRP £ 6600