Specifications
Drivetrain
| Chain | SRAM PC-1110, 11-speed w/PowerLink |
|---|---|
| Crank | RaceFace Aeffect, 6000-series alloy, 24mm spindle, 52mm chainline, 28T |
| Derailleurs | Rear: SRAM GX, long cage, 11-speed |
| Shifters | SRAM GX, 11-speed, trigger |
| Cassette | SRAM XG-1150, 11-speed, 10-42t |
Frameset
| Fork | RockShox Lyrik RC 29/27.5+, Solo Air, compression and rebound adjust, tapered steerer, 15x110mm Maxle Stealth thru-axle, 51mm offset, 160mm travel |
|---|---|
| Frame | FACT 9m, X-Wing layout, carbon front chassis, M5 alloy rear end, All-Mountain Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, ManFu link, oversized pivot bearings, 12x148mm dropouts, replaceable derailleur hanger, 165mm of travel |
| Shoc | Rear: RockShox Monarch Plus, Rx All-Mountain Tune, AUTOSAG, rebound and 3-position compression adjust, 216x57mm |
| Specialized Trail, 3D forged alloy, 4-bolt, 6-degree rise |
Wheels
| Hub | Front: Roval Traverse, sealed cartridge bearings, 15mm thru-axle, 110mm spacing, 24h - Rear: Roval Traverse, DT Swiss internals, sealed cartridge bearings, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h |
|---|---|
| Rims | Roval Traverse 29, hookless alloy, 29mm inner width, 24/28h, tubeless ready |
| Spokes | DT Swiss Revolution |
| Tyres | Front: Butcher, GRID casing, 29x2.3", 60TPI, Aramid folding bead, 2Bliss Ready - Rear: Slaughter, GRID casing, 29x2.3", 60TPI, Aramid folding bead, 2Bliss Ready |
Brakes
| Brakes | Front: SRAM Guide R, hydraulic disc, organic pads, Guide S4 4-piston caliper, 200mm rotor - Rear: SRAM Guide R, hydraulic disc, organic pads, Guide S4 4-piston caliper, 180mm rotor |
|---|
Components
| Handlebar | Specialized DH, 7050 alloy, 8-degree backsweep, 6-degree upsweep, 27mm rise, 780mm, 31.8mm |
|---|---|
| Grips | Specialized Sip Grip, half-waffle, S/M: regular thickness, L/XL: XL thickness |
| Saddle | Body Geometry Henge Comp, hollow Cr-Mo rails, 143mm |
| Seatpost | Command Post IRcc, 12 position micro-height adjustable, alien head design, bottom mount cable routing, remote adjust SRL lever, 30.9mm, S: 100mm, M/L/XL: 125mm travel |
| Stem | Specialized Trail, 3D forged alloy, 4-bolt, 6-degree rise |
| Pedals | Resin Test Ride w/toe clips |
geometry
| Stack | 636mm |
|---|---|
| Reach | 470mm |
| Head-Tube Length | 125mm |
| Head-Tube Angle | 66° |
| B-B Height (29x2.3) | 352mm |
| B-B Height (650x3.0) | 345mm |
| B-B Height (650x2.8) | 339mm |
| B-B Drop | 19mm |
| Trail | 107mm |
| Fork Length (full) | 569mm |
| Fork Rake/Offset | 51mm |
| Front-Center | 799mm |
| Chain-Stay Length | 432mm |
| Wheelbase | 1231mm |
| Top-Tube Length (horizontal) | 625mm |
| Bike Stand-Over Height | 796mm |
| Seat-Tube Length | 523mm |
| Seat-Tube Angle | 75° |
Other models in the Enduro (2017) serie
ENDURO COMP 650B
RRP £ 2600
S-WORKS ENDURO 29 - LIMITED EDITION FRAME
RRP £ 2800
S-WORKS ENDURO 650B FRAME
RRP £ 2800
S-WORKS ENDURO 29/6FATTIE FRAME
RRP £ 2800
S-WORKS ENDURO 650B - LIMITED EDITION FRAME
RRP £ 2800
Enduro Comp 29/6Fattie
RRP £ 2600
S-WORKS ENDURO 29/6FATTIE
RRP £ 6600
ENDURO PRO CARBON 650B
RRP £ 5200
S-WORKS ENDURO 650B
RRP £ 6600