Compare bikes: Compare Specialized Stumpjumper FSR S-Works Stumpjumper FSR 29 (2017) vs. Trek Slash Slash 9.9 29 Race Shop Limited (2017) - Findabike

SRAM XX1 Eagle, black, 12-speed w/PowerLink

SRAM XX1 Eagle, carbon, 30mm spindle, 52mm chainline, 30T

SRAM X01 Eagle, 32T Direct Mount X-Sync

Rear: SRAM XX1 Eagle, 12-speed

Rear: SRAM X01 Eagle, Roller Bearing Clutch

SRAM XX1 Eagle, 12-speed, trigger

SRAM X01 Eagle, 12-speed

SRAM XG-1295, 12-speed, 10-50t

SRAM XG-1295, 10-50, 12-speed

Öhlins RXF36, 29/27.5+, Twin-Tube design, air spring w/ adjustable 3rd chamber, adjustable high and low speed compression, adjustable rebound, 15x110mm thru-axle, 51mm offset, 150mm travel

FACT 11m, full carbon chassis and rear end, Trail Geometry, SWAT™ Door integration, PF30 BB, fully enclosed internal cable routing, ManFu link, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 135mm of travel

OCLV Mountain Carbon main frame and 1x-specific stays, ABP, Boost148, Knock Block steerer stop, EVO link, E2 tapered head tube, Mino Link, Control Freak internal routing, Carbon Armor, PF92, ISCG 05, G2 Geometry, 150mm travel

FSA Knock Block IS-2, E2, sealed alloy cartridge

Front: Fox Factory 36 Talas, high/low speed compression adjust, E2 tapered steerer, Boost110, G2 Geometry w/51mm offset, 130/160mm travel - Rear: Fox Factory Float X2, 2-position damper, high/low speed rebound adjust, high/low speed compression adjust, tuned by Trek Suspension Lab, 230x57.5mm

Rear: Custom Öhlins STX, Single Tube design, Rx Trail Tune, 3rd Chamber air spring technology, AUTOSAG, adjustable compression & rebound damping, 197x48mm

Syntace F109, 6-degree rise, 31.8mm clamp

Bontrager Line Pro, Knock Block, 35mm, 0 degree

Front: Roval Traverse, sealed cartridge bearings, 15mm thru-axle, 110mm spacing, 24h - Rear: Roval Traverse SL, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h

Roval Traverse SL 29, hookless carbon, 30mm inner width, 24/28h, tubeless ready

DT Swiss Revolution

Front: Butcher, GRID casing, 29x2.3", 60TPI, Aramid folding bead, 2Bliss Ready - Rear: Slaughter, GRID casing, 29x2.3", 60TPI, Aramid folding bead, 2Bliss Ready

Bontrager SE4 Team Issue, Tubeless Ready, Core Strength sidewalls, aramid bead, 29x2.40"

Bontrager Line Elite 30, Tubeless Ready, 54T Rapid Drive, Boost110 front, Boost148 rear

Front: SRAM Guide RS carbon, hydraulic disc, organic pads, carbon lever, Guide S4 4-piston caliper, 200/180mm rotor - Rear: SRAM Guide RS carbon, hydraulic disc, organic pads, carbon lever, Guide S4 4-piston caliper, 180/160mm rotor

SRAM Guide Ultimate carbon hydraulic disc

Specialized Trail, FACT carbon, 6-degree upsweep, 8-degree backsweep, 27mm rise, 750mm, 31.8mm

Bontrager Line Pro, OCLV Carbon, 35mm, 27.5mm rise, 780mm width

Specialized Sip Grip, half-waffle, S/M: regular thickness, L/XL: XL thickness

Body Geometry Henge Expert, hollow titanium rails, 143mm

Bontrager Evoke 3, titanium rails

Command Post IRcc, 12 position micro-height adjustable, alien head design, bottom mount cable routing, remote SRL lever, 30.9mm, S: 100mm, M/L/XL: 125mm travel

Bontrager Drop Line 125, under-bar remote lever, 2-bolt head, 31.6mm, zero offset, internal routing

Syntace F109, 6-degree rise, 31.8mm clamp

Bontrager Line Pro, Knock Block, 35mm, 0 degree

Resin Test Ride w/toe clips